-40%
Can-Am Maverick (4) 8" Tower Speakers+4-Channel Amplifier+Bluetooth Controller
$ 266.03
- Description
- Size Guide
Description
Car Audio & VideoPro Audio
Marine Audio
Lighting
Karaoke
Home/Portable Audio
Package: MTX MUD100.4 400 Watt RMS 4-Channel Amplifier For Polaris RZR/ATV/UTV/Cart + MTX Audio MUDBTRC Bluetooth Controller Receiver For Polaris RZR/ATV/UTV/Cart + (2) Pair of Rockville RWB80B 8" Black WakeBoard Tower Speakers With 1200 Watts, 600 Watts Each Speaker
Click Thumbnails to Enlarge
Condition and Warranty
Condition:
BRAND NEW IN ORIGINAL PACKAGING
Warranty:
2 YEAR MANUFACTURER
Product Description
New Page 1
Package Includes:
(1) MTX MUD100.4 400 Watt RMS 4-Channel Amplifier Amp For Polaris RZR/ATV/UTV/Cart
(1) MTX Audio MUDBTRC Bluetooth Controller Receiver For Polaris RZR/ATV/UTV/Cart
(2) Pairs of Rockville RWB80B 8" Black 2 Way 300 Watt Marine Wakeboard Tower Speakers
Authorized MTX Audio Dealer!
Description of MUD100.4:
Rugged, Compact & Powerful
Powerful, yet compact, audio amplifier that can be installed on any UTV, boat, sand rail, or motorcycle. The MTX MUD100.4 is the most compact amplifier that MTX has ever made. This unit features full range class D topology that delivers exceptional sound quality and excellent thermal efficiency. The unit includes 4 channels that are capable of delivering 100 watts of RMS power per channel. More than enough power to drive a single or dual full range speakers per channel.
Outdoor Rugged
The entire unit is weather resistant including a conformal coated circuit board and control covers that prevent damage from moisture intrusion. The unique design includes a pigtail that contains all of the wiring necessary to connect power, ground, and signal without having to make a connection directly at the amplifier. This pigtail keeps moisture, dirt, and other hazards from harming the internal components of the unit, ensuring you can enjoy your music wherever the trail takes you.
Features:
MTX MUD100.4 400 Watt RMS 4-Channel Amplifier For Polaris RZR/ATV/UTV/Cart
RMS Power @ 4 Ohms: 50 Watts x 4 Channels
RMS Power @ 2 Ohms: 100 Watts x 4 Channels
RMS Power Bridged @ 4 Ohms: 200 Watts x 2 Channel
Peak Power Handling: 400 Watts
Topology: Full Range Class D
Weather Resistant: IP66 Rating
THD: <0.2%
Frequency Response: 10Hz - 32kHz
Crossover: Fixed HPF/LPF @ 80Hz, 12dB/Oct
Max Sensitivity: 200mV
Maximum Input Signal: 5V
Internal 4 x 50 Watt Power Amplifier
Compact Design Enables Installation Anywhere
Conformal Coated Printed Circuit Board that Resists Moisture
Fixed Crossovers, High and Low Pass Allow Use with Full Range Speakers or Subwoofers
Product Dimensions (H x W x D): 6.52" x 5.51" x 1.86" inches
Click here
for the Owner's Manual
Description of MUDBTRC:
The MTX Audio MUDBTRC is a universal Bluetooth 3.0 receiver and remote control that is designed to work with most Bluetooth enabled devices including iPhone® and Android® smartphones and tablets. This easy to install and use, all in one unit is capable of transforming your Bluetooth enabled mobile device into the center of your vehicle’s audio system. Designed to mount a variety of vehicles and able to work with most amplifiers, the MUDBTRC can be used on motorcycles, side-by-sides, boats, cars, or trucks.
The unit includes hardware to surface mount, flush mount, or clamp mount the device based on application. It features an all weather design that will resist moisture, dirt, heat, and cold allowing it to be used in the most gruelling applications including off-road vehicles, motorcycles, or boats. The unit includes an auxiliary output that can be used to connect to the input of most aftermarket ampliifers allowing you to stream music or other content from a device or tablet to the amplifier and out to the speaker. This eliminates the need to install a radio or other source unit if it is not needed. The large buttons are easy to use even when wearing gloves.
In The Box:
Bluetooth Remote Control
Installation Cables (Power/Ground/Accessory) 1 Meter
Mounting Adapters
Features:
MTX Audio MUDBTRC Bluetooth Controller Receiver For Polaris RZR/ATV/UTV/Cart
Ideal for Use in Boats, ORV's, ATV's, and Cars/Trucks
Replaces Head Unit and Works with Any Amplifier
Three Mounting Options – Surface, Flush, or Clamp
IP66 Weather Rating: (Dust Tight and Protected Against Powerful Water Jets)
Five Front Panel Touch Controls
Back lit buttons for easy use day or night
Works with Most Bluetooth Devices Including Smartphones and Tablets
Hassle Free Bluetooth Auto-Pairing
Includes Power, Ground, and Output Connections
Click here
for the Owner's Manual
Video of RWB80B:
Advantages of the RWB80B:
No exaggerated power ratings: These speakers are rated with true world RMS ratings. No bootleg or exaggerated power ratings like other brands. These speakers are 200 watts RMS and 300 watts peak. (200 watts RMS is equal to about 500 watts rated by other brands)
New and improved mounting bracket reinforced with steel - The mounting brackets are waterproof and durable plastic. They are reinforced with nylon and steel to make them extra strong. The nylon allows easy adjusting while the strength of steel can withstand the toughest conditions.
Marine grade components and materials: these speakers are truly marine grade. They will not get damaged by water, salt water, or moisture. In addition the terminals (which are normally the first part of a marine speakers that gets damaged by water are made out of stainless steel and they are completely rustproof. There is also an additional waterproof coating cut completely protect the speakers.
These can withstand all elements on the water for a lifetime of worry free use
The mounting screws are 1/4" longer than other versions we carry to accommodate thicker mounting bars. In addition to wakeboard tower's on boats, we tested these to be perfect for installing in Jeep Cherokee vehicles and even ATV's.
Features:
Rockville RWB80B Pair of 8" Black WakeBoard Tower Speakers Totaling 600 Watts (300 Watts per speaker)
8" Two-Way High Fidelity Speaker System
Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel
Includes Stainless Steel Mounting Hardware
1" Polymide Dome Neodymium Midrange Tweeter
Built-In Two-Way Crossover Network
Fully Marinized Against Salt & Fresh Water Conditions
Completely Water / Rust Resistant
Terminals Are Sealed with Rubber Gaskets
Specially Tuned for PA Voice Over
Polypropylene Mica Injected Cone with Santoprene Surround
High BL Magnet Motor Structure
Y30 High Density Magnets
Oversized 1.25” Kapton Voice Coil
Large mounting screw accommodates roll bars found on many off road vehicles such as Jeep Wranglers, and ATV's equiped with a roll bar/cage.
These Wakeboards Fit bars ranging from 1.26 inches to 2.05 inches and can even fit larger Bars with our optional longer screws
Color: Black
Includes long screws that accommodate Jeep Wrangler and any roll bar
Includes Stainless mounting hardware that wont rust or corrode
Details:
Peak Power Handling: 300 Watts
RMS Power Handling: 200 Watts
Frequency Response: 60–20,000 Hz
Sound Pressure Level: 98dB @ 1w/1m
Impedance: 4 Ohms
Mounting Depth: 10.5"
Includes:
(2) Wakeboard Speakers
Mounting Brackets
Integrated Grill
Installation Hardware
Owner's Manual
The Rockville Difference:
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.
Great features and great quality make Rockville a great choice.
Return Policy
AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.
Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.
You may return this item for a refund within 30 DAYS of purchase.
Warranty Repair/Exchange Period: 2 YEAR
If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:
We will send you a
pre-paid shipping label
to replace the item for a brand new one.
We will send you a
pre-paid shipping label
to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
If you are returning a
working item
in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.
Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.
Please note
items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.
You
MUST notify us within 48 hours
if you receive an item that was damaged during shipping.
Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return.
All returns require a RMA# to be returned back to our facility.
Item Code: MUD100.4+MUDBTRC+RWB80B MAVERICK
Home
/
About Us
/
Contact Us
/
Returns
/
FAQ's
Copyright © 2016
Audio Savings
, All rights reserved. |
eBay Template Design